BRAND NEW! THE PATEREK MANUAL 3rd EDITION

Here are some sample pages out of chapters of the new Paterek Manual.
Just click on the links below.

Chapter One Tools and Fixtures	Chapter Six The Front Triangle	Chapter Eleven Building Custom Stems
Chapter Two Geometry and the Drawing	Chapter Seven The Fork	Chapter Twelve Building Custom Racks
Chapter Three Materials & Design Variations	Chapter Eight The Rear Triangle	Chapter Thirteen Tandems
Chapter Four The General Prep	Chapter Nine Bridges, Braze-ons, Etc.	Chapter Fourteen Frame Repair
Chapter Five The Sub-assemblies	Chapter Ten Painting	Appendix D Plans for Fixtures

Order the book - click here

What is not covered in this book? There is nothing on full suspension mountain bike frames in this book. There is very little on mountain bike suspension forks in this book. There are only tidbits about recumbant building. There is very little on titanium, aluminum, or composites. If you are into alternative materials, recumbants, or suspension frames, please don't buy this book.

Home | About | Videos | Software | The Paterek Manual